TU ANUNCIO / YOUR PUBLICITY

AQUÍ PODRÍA ESTAR TU ANUNCIO: / HERE COULD BE YOUR AD E-mail

martes, 1 de octubre de 2013

The detail (II) / El detalle (II)

MOVIÉNDONOS POR EL EJE

MOVING FROM THE AXIS


Para la creación del eje sobre el cual nos desplazaremos podemos actuar de varias maneras. Estas son:
  1. A mano. Una a una.
  2. Partiendo de los datos de un eje
  3. Utilizando la aplicación.
Pasamos a exponer cada una de ellas.

To create the axis about which we move we can act in several ways. These are:


One on one.
From the data of an axis
Using the application.
We expose each one of them.


A MANO. UNA A UNA

ONE ON ONE

Creamos un directorio. Con la intención de ser ordenados será el directorio "e" (de eje). E iremos creando los archivos pk.co2. Por ejemplo, para el pk 1+560 de nuestro ejemplo el contenido de este archivo será:

We create a directory. With the intention to be sorted it will be the folder "e" (axis, eje in spanish). And we will create .co2 files. For example, for the pk 1 +560 in our example the contents of this file will be:

511445.837
4712231.584
9.394
0.085052
0.996376
-8.860560
42.562402

Es decir, Coordenada X, Y, Z, Seno, Coseno, Longitud y Latitud. (seno y coseno de la dirección del eje)

Es evidente que el trabajo de ir de una en una es muy tedioso.

That is, coordinate X, Y, Z, Sine, Cosine, Longitude and Latitude. (sine and cosine of the direction of shaft)

Obviously one on one work is very tedious.


PARTIENDO DE LOS DATOS DE UN EJE

STARTING FROM THE DATA OF A AXIS

Si partimos de algo parecido a:
If we start with something like:

0     511097.536    4710781.273    60.85
10    511107.298    4710779.146    60.85
20    511117.264    4710778.43     60.85
30    511127.231    4710779.14     60.85
[...]

No es muy difícil desarrollar un programa que los vaya partiendo en archivos del tipo anteriormente expuesto.

It is not very difficult to develop a program that will sort based on the above files.


UTILIZANDO LA APLICACIÓN

USING THE APPLICATION


Este es uno de los usos del detalle. Para ello como ejemplo y dado que nuestro ejemplo acaba en el pk 2+900 vamos a dar los pasos para la creación del 2+910.

PRIMERO: Seleccionamos el 2960, el valor de "Alcance" será 10, y le damos a "Lee para detalle". Nos hará el siguiente dibujo:

This is one of the uses of detail. Our example just the pk 2 +900 we will take steps to create 2 +910.

FIRST: Select the 2960, the value of "Range" (alcance) is 10, and we give "Read to detail." (lee para detalle) We make the following picture:


Posteriormente le damos a "Dibuja eje", escribimos 2910 después de PK:, buscamos con el ratón y situamos el recuadro rojo en el punto más idóneo. Le damos "T. al ROJO" que significa: "Transmite los datos del punto rojo al nuevo punto del eje".

Then we give "Draw Axis" (Dibuja eje). We wrote 2910 after PK:, we situate with the mouse and the red box in the furthest point suitable. We go to "T. to RED" (T al rojo) which means "Transmit data to the new point red point the axis."


A partir de este punto se habrá creado el nuevo archivo 2910.co2 y seguiremos con el 2920 y así sucesivamente.

Del detalle qudan por aclarar cuales son las funcionalidades del botón "Diédrica" y el de "Ejecuta RECORRIDO". Pero no adelantemos acontecimientos. 

Diagrama de flujo:

From this point you have created the new file 2910.co2 and will continue with the 2920 and so on.

The details remain to be clarified what the button functionality "dihedral" and "Run RUN". But not anticipate events.

Flow diagram:



Aparte de este sistema de ir formando el eje, tenemos otro sistema que nos permitirá correr un poco más. Eso será tratado en el próximo capítulo: FUNCIONES DE EJE.

Besides this system be shaping the axis, we have another system that will allow us to run some more. That will be discussed in the next chapter: AXIS FUNCTIONS.

No hay comentarios:

Publicar un comentario